XADO Atomic oil 5W-40 CK-4

XADO ATOMIC OIL 5W-40 CK-4 is a premium full synthetic motor oil for naturally aspirated and turbocharged SHPD engines of trucks operating under maximum loads in a wide range of climatic conditions.

Meets modern requirements for engines with extended oil life from leading truck manufacturers and contains a special additive package that provides excellent piston cleanliness, high wear resistance, and maximum protection against corrosion. The API CK-4 specification allows improving oxidation stability by 60% compared to API CJ-4 oils.

Recommended for use in engines with or without a diesel particulate filter (DPF) and most engines with exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) systems. Thanks to the low-SAPS technology, XADO ATOMIC OIL 5W-40 CK-4 belongs to oils with a low level of sulfated ash, phosphorus, and sulfur.

The oil is specially formulated for high-speed diesel engines meeting 2017 emission standards and Tier 4 standards for off-road vehicles operating all season under severe conditions. Suitable for EURO II, EURO III, EURO IV, EURO V, and EURO VI engines. Can be used with high-sulfur fuels (up to 500 ppm), subject to reduced service intervals.

XADO ATOMIC OIL 5W-40 CK-4 is fully backward compatible and can be used without any restrictions in the engines of cars and special equipment of mixed fleets, in which motor oils with such specifications as API CJ-4; API CI-4+; API CI-4; API CF; API CG-4, etc., are recommended.

The engine life, its reliability and power will always be maintained at the highest possible level due to the presence of atomic REVITALIZANT® in the oil.

Advantages:

- Provides the highest possible cleanliness and antiwear protection of the operating surfaces of pistons, cylinders, crankshaft liners, and turbocharger support bearings.

- Ensures stable fuel economy and low emissions compared to oils with 15W-40 viscosity grade.

- Maximum oxidative stability of the oil reliably protects loaded engine parts during operation on high-sulfur fuel (sulfur content up to 0.5%).

- Can be used universally in any engines of mixed fleet vehicles with toxicity standards up to EURO VI.

Specifications and technologies:

API CJ-4/SM

API CK-4

ACEA E2/E7/E9

MB 228.31

MAN M 3275/M3575

Volvo VDS-4

Volvo VDS 4.5

Renault RLD-3/RLD-2

Renault VI RLD-4

Caterpillar ECF-3/ECF-2/ECF-1-A

CES 20076/20077/20078/20081/20086

Deutz DQC III-10-LA

Global DHD-1

MTU type 2.1/type 2/type 1

Detroit Diesel DDC 93K218

Detroit Diesel DDC 93K215

Detroit Diesel 93K222

Mack EO-O PP

Mack EO-N Premium Plus

Mack EOS-4.5

JASO DH-2

Technical information:

Color: Brown 

Density at 20 °C: 0.851 kg/L ASTM D 1298

Viscosity, kinematic, at 40°C: 90.2 cSt ASTM D 445

Viscosity, kinematic, at 100°C: 14.4 cSt ASTM D 445

Viscosity index: 166 ASTM D 2270

Viscosity, dynamic (CCS): 6350 cP ASTM D 2602

Flash point: 208 °C ASTM D 93

Pour point: –39 °C ASTM D 97