
- Stock: 77
- Model: XA20020
Available Options
XADO Atomic Oil ATF III is top-quality mineral oil for automatic transmissions and hydraulic systems. It contains Atomic REVITALIZANT®. Specially designed for automatic transmissions of cars produced after 1995. Also recommended to be used in cars produced before 1995. The oil is applied to hydraulic systems of steering wheel boosters and mechanical transmissions. This oil is formulated on the base of the special narrow cut of refined mineral base oil with a very high viscosity index. Alloyed with a special additive package. Its characteristics exceed the requirements of General Motors, Ford and ZF for the oils for automatic transmissions. Extended service life, comfort, smoothness of the gear shift will be always kept in top condition due to the patented formula of atomic Revitalizant included in XADO Atomic Oil. Application of Revitalizants is considered as a prospective direction in the area of energy and resource-savings and is confirmed by certification tests in 35 countries of the world. The base oil for XADO Atomic Oil ATF III is formulated from the special narrow cut of refined hydrocarbons of the oil from the shelf oilfield of the North Sea.
Advantages:
- Increases operation reliability of the automatic transmission
- Due to Atomic Revitalizant, the oil protects bearings, spool-and-sleeves, sleeve parts, gears from wear and extends transmission life span
- Improves operation of friction clutches of automatic transmissions and increases the smoothness of the gear shift
- Guarantees high stability of friction properties under extended service life - more than 56 000 miles
- Due to high fluidity the oil provides quick start of operating mode, has a low pour point (below – 44 F)
- Damps extreme loadings
- Protects transmission parts and control mechanisms from corrosion even under long time stoppage
- It has very small low-temperature viscosity (comparable to the viscosity of the synthetic oil), it provides easy and smooth gear shift at low temperatures (below – 22 F). High viscosity index (VI = 197) guarantees the stability of rotational moment under any operating regime of the engine
Specifications and
technologies:
Meets the requirements of
specifications:
GM Dexron III /II-E/II-D, B
/AQ-ATF-Type A
FORD Mercon
Meets the requirements of the
OEM:
Caterpillar TO-2
MB 236.1/5/9
Volvo 97335-12
Allison C4
MAN 339 Typ F/339 Typ V1/ 339
Typ Z1
Mercon M2C 138-CJ, M2C 166-H
Voith G 607/H55.6335.34
Renk Doromat
ZF TE-ML 03D/04D/09B/11A/ 14B/17C
Technical information:
Density at 70 F, kg/l - 0,864
Viscosity at 212 F, mm2/s -
7,7
Viscosity at 104 F, mm2/s -
35,2
Viscosity at -31, mPa s -
20000
Viscosity index - 197
Flash point, F - 395
Pour point, F - <-44